+886-2-8772-8910
Excimer lamp L11751-01
Parameter |
Description / Value |
---|---|
Rating |
180 W |
Emission wavelength |
172 nm |
Irradiance ① |
50 mW/cm2 or more |
Lamp design life |
2000 h |
Oprating ambient Temperature / humidity |
+5 °C to +35 °C / below 60 % (no condensation) |
Storage ambient Temperature / humidity |
-25 °C to +55 °C / below 80 % (no condensation) |
Weight |
220 g |
①Measured with a Hamamatsu UV power meter H9535-172
Lamp house for excimer lamp E12499
Parameter |
Description / Value |
---|---|
Irradiation area |
400 mm × 38 mm |
Cooling method |
Forced-air cooling by duct |
Duct suction air flow rate |
0.35 ± 0.08 m3/min |
Oprating ambient Temperature / humidity |
+5 °C to +35 °C / below 60 % (no condensation) |
Storage ambient Temperature / humidity |
-25 °C to +55 °C / below 80 % (no condensation) |
Weight |
10.3 kg |
Power supply for excimer lamp C11997
Parameter |
Description / Value |
|
---|---|---|
Input voltage |
Single phase AC200 V to AC240 V |
|
Oscillation frequency |
Approx. 2 MHz |
|
RF output power |
0 to 180 W |
|
Power consumption |
Typ. |
500 VA |
Max. |
750 VA |
|
Oprating ambient Temperature / humidity |
+5 °C to +35 °C / below 60 % (no condensation) |
|
Storage ambient Temperature / humidity |
-25 °C to +55 °C / below 80 % (no condensation) |
|
Contol method |
External control / controller control |
|
Weight |
10.5 kg |
●Lamp house for excimer lamp E12499
●Power supply for excimer lamp C11997
●Switch box C12633 Handy controller C12632
These are excimer lamp light sources controllers ideal for experiments requiring excimer lamp light sources.
The switch box is a simple controller for turning the excimer lamp on and off, while the handy controller allows precise lamp control and the same operation as by external control.
Left: Switch box, Right: Handy controller