+886-2-8772-8910
Type no. |
Pixel size |
Number of |
Line rate |
Cooling |
Dedicated driver |
---|---|---|---|---|---|
S11155-2048-02 |
14 × 500 |
2048 × 1 |
2327 |
Non-cooled |
C11165-02 |
S11156-2048-02 |
14 × 1000 |
||||
S13255-2048-02 |
14 × 500 |
One-stage |
|
||
S13256-2048-02 |
14 × 1000 |
Note: Windowless type is available upon request.
Resistive gate structure
In ordinary CCDs, one pixel contains multiple electrodes and a signal charge is transferred by applying different clock pulses to those electrodes [Figure 1]. In resistive gate structures, a single high- resistance electrode is formed in the active area, and a signal charge is transferred by means of a potential slope that is created by applying different voltages across the electrode [Figure 2]. Compared to a CCD area image sensor which is used as a linear sensor by line binning, a one-dimensional CCD having a resistive gate structure in the active area offers higher speed transfer, allowing readout with low image lag even if the pixel height is large.
|
◎ Front-illuminated type
The S11151-2048 is a front-illuminated CCD linear image sensor with high sensitivity and high resistance to UV light.
Type no. |
Pixel size |
Pixel pitch |
Number of |
Line rate |
Dedicated driver |
---|---|---|---|---|---|
S11151-2048 |
14 × 200 |
14 |
2048 × 1 |
484 |
C11160 |
Note: Windowless type is available upon request.
Spectral response (without window, typical example)*2 |
|
|
Type no. |
Pixel size |
Number of |
Number of |
Pixel rate |
Line rate |
Vertical |
Compatible |
---|---|---|---|---|---|---|---|
S10200-02-01 |
12 × 12 |
1024 × 128 |
2 |
30 |
50000 |
Bi- |
- |
S10201-04-01 |
2048 × 128 |
4 |
C10000-801 |
||||
S10202-08-01 |
4096 × 128 |
8 |
- |
||||
S10202-16-01 |
4096 × 128 |
16 |
100000 |
- |
TDI (Time Delay Integration) mode
In FFT-CCD, signal charges in each line are vertically transferred during charge readout. TDI mode synchronizes this
vertical transfer timing with the movement timing of the object incident on the CCD, so that signal charges are integrated a number of times equal to the number of vertical stages of the CCD pixels.
|
Spectral response (without window) | Configuration (S10201-04-01) | |
The back-thinned (back-illuminated) structure ensures higher sensitivity than front-illuminated types in the UV through the near IR region (200 to 1100 nm).
|
Using multiple amplifiers (multiple output ports) permits parallel image readout at a fast line rate.
|
|
◎ Front-illuminated type
Type no. |
Pixel size |
Number of |
Number of |
Pixel rate |
Line rate |
Dedicated driver |
---|---|---|---|---|---|---|
S12551-2048 |
14 × 14 |
2048 × 1 |
1 |
40 |
19200*2 |
– |
S12379 |
8 × 8 |
4 |
72000 |
– |
*2: With electronic shutter