SCAN BLOCK: C10516

Language
- 日本語
- English

產品介紹 Products Information

SCAN BLOCK: C10516

E-mail contact

+886-2-8772-8910

APPLICATIONS

● Laser scanning microscopes

● Confocal laser scanning microscopes

FEATURES

● 2D scan by two galvano scanners

● Contains a telecentric f (F-theta) lens

● Wide observation area of 21.5 mm diameter

● High-magnification observations in combina- tion with a microscope objective lens

● Covers a wide spectral range

CONFIGURATION

The C10516 consists of a scan block main unit and a control unit. Two galvano scanners and a telecentric fq lens are built into the scan block main unit. The control unit contains a driver board for driving and controlling the galvano scanners.

Note 1: This system requires a data acquisition unit (DAQ) that outputs analog signals for controlling the galvano scanners and acquires PMT signals.

Note 2: The optical blocks connected to the scan block can be changed according to the measurement purpose.

SPECIFICATIONS

Items			Specifications	Units
Power input			AC100 to AC240	V
Power consumption		Max.	85	VA
Optical characteristics	Design wavelength ①		488 to 632	nm
	Transmittance (≥90 %)		440 to 720	nm
	Focal length		50	mm
	Maximum measurement area		21.5	mm
	Maximum measurement area (inscribed quadrangle)		15 × 15	mm
	Scan angle of maximum measurement area		±12.4	deg.
	Input beam aperture		4	mm
	Working distance		20	mm
	Resolution		80	Lp/mm
Galvano scanner characteristics	Maximum command input signal ②		±6	V
	Scan length per command input signal ③		2.5	mm/V
	Maximum scan speed		400	Hz
	Fill fraction ④		≥70	%
Mirror characteristics	Coating		Al	—
Mirror characteristics	Damage threshold		100 to 150	W/cm2
Operating ambient temperature			0 to +45	°C
Storage temperature			-10 to +50	°C
Operating ambient humidity ⑤			Below 80	%
Storage humidity ⑤			Below 85	%

①The telecentric fθ (F-theta) is designed with three wavelengths (488nm, 532nm, 632nm).

②Voltage supplied to the X and Y axis scanner signal input on the control unit.

③Scan length at the field-of-view position for command input signal voltage that is supplied to the galvano scanners.

④Percentage of constant velocity movement zone where the galvano scanner enters the measurement area.

⑤No condensation

Eelecentric fθ lens transmittance		Command input voltage and observation field of view

CONNECTION EXAMPLES

◎Reflected light detection

Attaching other optical blocks to the light input port of the scan block allows observations in an area of 15 mm × 15 mm

◎Fluorescence detection using scan block attached to microscope port

The scan block can be connected to the C-mount camera port of a commercially available microscope via the microscope port adapter that comes with the scan block. This system allows fluorescence image acquisition by laser scanning

◎Fluorescence detection using confocal optical system

Using the scan block with a stage block and other optical blocks allows building a microscope system.

DIMENSIONAL OUTLINES (Unit: mm)

◎Main unit

◎Control unit

檔案下載

C10516 datasheet