產品介紹 Products Information

聯絡資訊 Contact
  • 半導體IC產品
  • 聯絡人: 劉小姐
  • 電話: +886-2-8772-8910 分機 619
聯絡資訊 Contact
  • 電子零件產品
  • 聯絡人: 林小姐
  • 電話: +886-2-8772-8910 分機618
聯絡資訊 Contact
  • 真空相關產品
  • 聯絡人: 王經理
  • 電話: +886-2-8772-8910 分機161
聯絡資訊 Contact
  • PCB機器
  • 聯絡人: 王小姐
  • 電話: +886-2-8772-8910 分機631
聯絡資訊 Contact
  • 化學相關產品
  • 聯絡人: 陳小姐
  • 電話: +886-2-8772-8910 分機633
聯絡資訊 Contact
  • 不確定品牌/型號
  • 聯絡人: 陳小姐
  • 電話: +886-2-8772-8910 分機633

MPPC module: C11209-110

E-mail contact

+886-2-8772-8910

Features
High sensitivity in the short wavelength range   
High-speed response
Built-in temperature compensation circuit
Compact and lightweight
 
Applications
Rangefinders
Fluorescence measurement
Analytical instruments
 
Structure
Parameter
Symbol
Value
Unit
Internal MPPC
-
S12571-010C
-
Effective photosensitive area
-
1 × 1
mm
Pixel pitch
-
10
μm
Number of pixels
-
10000
-
 
 
Absolute maximum ratings
Parameter
Symbol
Condition
Value
Unit
Supply voltage
Vs
 
6
V
Operating temperature
Topr
No condensation
-10 to +40
°C
Storage temperature
Tstg
No condensation
-20 to +50
°C
Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings.
 
Electrical and optical characteristics (Typ. Ta=25 °C, λ=470 nm, unless otherwise noted)
Parameter
Symbol
Condition
Min.
Typ.
Max.
Unit
Spectral response range
λ
 
320 to 900
nm
Peak sensitivity wavelength
λp
 
-
520
-
nm
Temperature stability of output voltage
-
Ta=25 ± 10 °C
-
-
±5
%
Photoelectric sensitivity
-
 
2.1 × 106
2.6 × 106
3.2 × 106
V/W
Rise time
-
 
-
500
-
ps
Cutoff frequency
High band
fc
 
-
40
-
MHz
Low band
 
-
10
-
kHz
Noise equivalent power
NEP
Dark state
-
3
-
fW/Hz1/2
Minimum detection limit
-
Dark state
-
20
-
pW rms
Saturation incident light level
-
 
-
100
-
nW
 
 
Electrical characteristics
Parameter
Symbol
Condition
Min.
Typ.
Max.
Unit
Supply voltage
Vs
 
4.75
5
5.25
V
Current consumption*1
Ic
Dark state
-
35
70
mA
*1: If strong light exceeding the saturation light level enters the MPPC module, a power supply current of about 200 mA flows in the module, so use an external power supply with a capacity of at least 300 mA.
 
Block Diagram
 
Connection Example
Using the supplied power cable, connect the MPPC module to a power supply. You can monitor the output waveform by connecting the MPPC module to an oscilloscope.
 
Measurement Example
Analog Output   Toogle Output
 
 
Photoelectric Sensitivity vs. wavelength
   
 
Linearity
 
Dimension outline (unit:mm)

 

檔案下載